![]() O Advanced: Format – 2 Channel 24 bit, 96000 Hz (Studio Quality) VUMT standalone version – Works, provided with audio feed from What U Hear (Sound Blaster X7) with following settings: Fine within DSP Studio window but unable to be undocked or sized appropriately. (If changed to 6 Channel, it shows ‘Format Not Supported’ error). VUMT as VST Plugin under MC28 (within DSP Studio) – Works, provided the Output Format is set to 2Ch. Toggling between SB X7 ASIO and SB X7 (Kernel Streaming) toggles the behaviour. BUT, although Windows Sound Panel What U Hear (Sound Blaster X7) registers normal output VU / RMS levels on both L and R Channels, the X7 is only actually outputting an analogue signal on the Left Channel. O Selecting the Sound Blaster X7 ASIO is currently an anomaly: It will only work at all with MC Buffering at 50ms or greater and the Driver Control Panel Latency set to the maximum of 100ms. Settings: 24-bit integer 0.5s Buffering and Volume Device Sound Blaster X7 MC Audio Device – set to Sound Blaster X7 (Kernel Streaming). Actual Volume controlled by Creative SB X7 volume control. The following summarises the now working setup: This detects the L & R channel signals at the Creative X7 DAC and, with MC set to use Internal Volume (at 100%) results in a suitable feed for the meters without having to introduce the additional links between MC and DAC required by the virtual cable drivers. ![]() The solution I've presently settled on is very similar, but making use of the built-in Windows Sound Panel 'What U Hear' functionality which I have discovered as a result of looking into Chipicui's very helpful leads. I have now had a chance to look into the virtual audio cables and related options. I have no doubt missed something basic and would greatly appreciate advice and wisdom on how to achieve the intended objective ! I have tried setting MC28 to all the available Audio settings (Direct, WASAPI, ASIO) with no effect. Something like a Logitech webcam with a live microphone is selected as the source- but that is picking up the ‘in the room’ audio from the speakers and not the output from MC28. An input to the Creative X7 is selected (eg. The only settings which have produced life in (either) meter is when:Ī. However, I am completely unable to get either of these to access MC28. mvMeter2 can be run in SAVIHost to achieve the equivalent ‘standalone’ instance. VUMT has a standalone version in the package which opens correctly. I have trawled Interact but have been unable to find a means of achieving this. I would like to be able to run the meters undocked / in separate frameless window, rather than having to have the full DSP window open, obscuring the MC desktop. Both run perfectly as plugins under JRiver MC28 DSP Studio and display whatever source file is playing in MC28. TBProAudio’s mvMeter2 and Klanghelm’s VUMT deluxe. Feeding a Creative X7 DAC-pre-Amp and thence 5.1 Audioengine active speakers
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |